1 1 2 3 4 5 6 7 8 9 10 11 13
Home
About Us
Contact
Sales
Contract Manufacturing
Contract Engineering
News
Support
Switch country/language: Deutschland (Deutsch) Switch country/language: United Kingdom (English) Switch country/language: Italia (Italiano)
Print

WiFi Embedded Modules

WiFi Embedded Modules

rn131_b150.jpg

WiFi modules, which are loosely based upon the idea of AT command sets that were historically used to control data modems is used to create a simple user interface to the datasphere portfolio of Wi-Fi products. datasphere's modules however are offering a far richer English language approach to create a simple user interface.

WiFi modules are providing embedded designers with a simple data pipe through which to send data over a Wi-Fi networks yet without the need to add/remove the Wi-Fi related headers and footers - in effect the designer creates a simple 'wireless serial cable'. The code operates in one of two modes; data mode and control mode. Data mode is a simple data-in data-out mode; data written to the UART is sent out over Wi-Fi and data received over Wi-Fi is written out over the UART. A programmable escape sequence transitions the module into command mode where data written to the UART (or Wi-Fi if enabled) is used to configure variables such as SSID's, pass-phrases and so forth.



Display per page
Sort by
RN131G-I/RM

Product no.: 101000032
30.06 €
Price before VAT, plus delivery
Delivery weight: 4 g

560 pcs. in stock
can be shipped within 3 days


802.11 b/g Ultra Low Power, Surface Mount Module

Microchip's most popular Wi-Fi module, the RN-131G, is a complete, ultra-low power embedded TCP/IP solution. The combination of ultra-low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 milliseconds, allows the RN-131 to run for years on two standard AAA batteries. Using only 35mA when awake and 4uA when asleep, this remarkable power efficiency makes possible a new class of internet-enabled products. The RN-131G incorporates a 2.4 GHz radio, processor, TCP/IP stack, real-time clock, crypto accelerator, power management, and analog sensor interfaces. This complete solution is pre-loaded with software to simplify integration and minimize development time for applications. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX, GND) to create a wireless data connection.


RN171XVW-I/RM

New

Product no.: 101000053
instead of 26.00 €
21.33 €
Price before VAT, plus delivery
Delivery weight: 50 g

Still in stock
can be shipped within 3 days

802.11 b/g replacement for 802.15.4 systems

 


RN-174 EVAL Kit

New

Product no.: 101000054
56.00 €
Price before VAT, plus delivery
Delivery weight: 50 g

47 pcs. in stock
can be shipped within 3 days

802.11 b/g Super Module Development Kit


DW-RN171-XCW - Web-Server Version

New

Product no.: 101000063
29.20 €
Price before VAT, plus delivery
Delivery weight: 50 g

Not in stock
This product is subject to possible delivery delays.

The DW-RN171-XCW module is a standalone complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, the DW-RN171-XCW is perfect for mobile wireless applications such as asset monitoring, sensors and portable battery operated devices. It incorporates a 2.4GHz radio, 32-bit SPARC processor, TCP/IP stack, real-time clock, crypto accelerator, power management and analog sensor interfaces. This module is preloaded with firmware to simplify integration and minimizes development of your application. In the simplest configuration the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. Additionally, the analog sensor inputs can be used to interface a variety of sensors such as temperature, audio, motion and acceleration. The ability to go into deep sleep mode and automatically scan and associate to an AP when awake makes the DW-RN171-XCW suita-ble for roaming applications. The DW-RN171-XCW also includes a built in HTML client to automatically post serial uart data or sensor data to a web server. It also include an WEB SERVER OEM, it is possible to connect from a web browser at the ip and port of the module and then to control the Outputs and read the analog sensors. The Web server OEM can provide an HTTP response or XML. The XML response is useful  to integration in  web server applications. It is possible to disable the web server OEM and use the module in standard mode.

 

802.11 b/g Ultra Low Power OEM Module with ceramic antenna


icon_pdf_2.gif Datasheet

icon_pdf_2.gif User Manual incl. WEB Server Guide


DW-RN171-XXX EVAL Board

New

Product no.: S101000065
29.00 €
Price before VAT, plus delivery
Delivery weight: 100 g

20 pcs. in stock
can be shipped within 3 days

 

Evaluation Board supporting the DWRN171-XXX module family :

  • DWRN171-XC (Ceramic antenna)

  • DWRN171-XU (UF.L connector version)

  • DWRN171-XCW (with integrated Web-Server)

 


DWRN171XVW

New

Product no.: 101000073
20.80 €
Price before VAT, plus delivery
Delivery weight: 5 g

44 pcs. in stock
can be shipped within 3 days

The DWRN-XV-W module is a certified Wi-Fi solution especially designed for customers who want to migrate their existing 80.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. The DWRN-XV-W module is based upon Microchip' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface. The DWRN-XV-W module supports infrastructure networking for worldwide internet access directly by every node and adhoc connectivity for fully connected point to point networks, unlike many 802.15.4 implementations that need extensive, custom application profiles and additional bridging products. The DWRN-XV-W supports industrial temperature ranges, making it ideal for applications such as sensor networks, industrial or commercial controllers, utility meters, and M2M applications.


RN131G-I/RM - Kit

Product no.: S101000032
28.00 €
Price before VAT, plus delivery
Delivery weight: 40 g

640 pcs. in stock
can be shipped within 3 days

 

802.11 b/g Ultra Low Power, Surface Mount Module Kit contains :

1 x RN131G-I/RM Surface Mount Module

1 x Antenna PA-150A-R black

1 x Pigtail U.FL/RP-SMA (Cable Lenghts 100mm)


Microchip's most popular Wi-Fi module, the RN131G-I/RM, is a complete, ultra-low power embedded TCP/IP solution.

The combination of ultra-low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 milliseconds, allows the RN-131 to run for years on two standard AAA batteries. Using only 35mA when awake and 4uA when asleep, this remarkable power efficiency makes possible a new class of internet-enabled products.

The RN131G-I/RM incorporates a 2.4 GHz radio, processor, TCP/IP stack, real-time clock, crypto accelerator, power management, and analog sensor interfaces. This complete solution is pre-loaded with software to simplify integration and minimize development time for applications. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX, GND) to create a wireless data connection.


DW-RN171-XC

Product no.: 101000060
21.88 €
Price before VAT, plus delivery
Delivery weight: 10 g

185 pcs. in stock
can be shipped within 3 days

The DW-RN171-XC is a small form factor, ultra-low power embedded TCP/IP module measuring only 39 x 25 x 9.9 mm as THT version with 2mm pitch and ceramic antenna. The DW-RN171-XC is a standalone 802.11 b/g, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices. The module is pre-loaded with firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. For the developer, datasphere offers an evaluation board, the DW-RN171-XXX Kit.

 


DW-RN171-XU

Product no.: 101000061
22.85 €
Price before VAT, plus delivery
Delivery weight: 10 g

24 pcs. in stock
can be shipped within 3 days

The DW-RN171-XU is a small form factor, ultra-low power embedded TCP/IP module measuring only 39 x 25 x 9.9 mm as THT version with 2mm pitch and U.FL antenna connectro. The DW-RN171-XC is a standalone 802.11 b/g, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices. The module is pre-loaded with firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. For the developer, datasphere offers an evaluation board, the DW-RN171-XXX Kit.

 


RN131C-I/RM

Product no.: 101000044
27.43 €
Price before VAT, plus delivery
Delivery weight: 4 g

560 pcs. in stock
can be shipped within 3 days


802.11 b/g Ultra Low Power, Surface Mount Module

Microchip's most popular Wi-Fi module, the RN-131C, is a complete, ultra-low power embedded TCP/IP solution. The combination of ultra-low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 milliseconds, allows the RN-131 to run for years on two standard AAA batteries. Using only 35mA when awake and 4uA when asleep, this remarkable power efficiency makes possible a new class of internet-enabled products. The RN-131C incorporates a 2.4 GHz radio, processor, TCP/IP stack, real-time clock, crypto accelerator, power management, and analog sensor interfaces. This complete solution is pre-loaded with software to simplify integration and minimize development time for applications. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX, GND) to create a wireless data connection.


RN-131-EVAL

Product no.: 101000033
instead of 77.84 €
70.00 €
Price before VAT, plus delivery
Delivery weight: 500 g

23 pcs. in stock
can be shipped within 3 days


Special Offer

 

The RN-131-EVAL is a 802.11 b/g Wi-Fi evaluation kit for the RN-131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. The RN-131-EVAL comes with complete on-board TCP/IP stack, accessories and documentation to assist developers quickly evaluate the potential of the RN-131 module and reduce development times.


DW-RN171-XU-KIT

Product no.: S101000061
28.00 €
Price before VAT, plus delivery
Delivery weight: 10 g

24 pcs. in stock
can be shipped within 3 days

The DW-RN171-XU is a small form factor, ultra-low power embedded TCP/IP module measuring only 39 x 25 x 9.9 mm as THT version with 2mm pitch and U.FL antenna connectro. The DW-RN171-XC is a standalone 802.11 b/g, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices. The module is pre-loaded with firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection. For the developer, datasphere offers an evaluation board, the DW-RN171-XXX Kit.

The DW-RN171-XU-KIT includes :

1 x DW-RN171-XU Ultra Low Power OEM Module with U.FL Antenna Connector

1 x 2dBi WiFi Swivel Antenna

1 x 150mm Pigtail U.FL to SMA connector

 


RN134-I/RM

Product no.: 101000036
74.69 €
Price before VAT, plus delivery
Delivery weight: 4 g

Still in stock
can be shipped within 3 days


The RN-134 board is a field ready, Wi-Fi certified 802.11 b/g solution. It has the flexibility to connect directly to a standard RS232 interface or through the TTL UART interface to embedded systems. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN-134 is built upon Roving Networks' RN-131 module. The ultra-low power RN-131 module incorporates a 2.4 GHz radio, processor, full TCP/IP stack, real-time clock, FTP, DHCP, DNS and HTTP client. The module supports ad hoc and infrastructure networking modes. In the simplest configuration the hardware only requires four connections (PWR, TX, RX, GND). Additionally, the analog sensor interface provides direct connections to send temperature, acceleration, and other analog data without requiring additional hardware. The RN-131 module is programmed and controlled with simple ASCII command language. Once the RN-131 is set up it can scan to find an access point, associate, authenticate, and connect over any Wi-Fi network.


RN174P-I/RM

Product no.: 101000052
62.01 €
Price before VAT, plus delivery
Delivery weight: 4 g

17 pcs. in stock
can be shipped within 3 days


The RN-174 prototyping board is a field ready, Wi-Fi certified 802.11 b/g solution. It has the flexibility to connect directly to a standard RS232 interface or through the TTL UART interface to embedded systems. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN-174 is built upon Microchips' RN-171 module. The RN-171 module incorporates a 2.4 GHz radio, processor, full TCP/IP stack, real-time clock, FTP, DHCP, DNS, and HTML client to connect to a remote server. The RN-171 is the smallest, lowest power 802.11 b/g module available. The module supports ad hoc and infrastructure networking modes. In the simplest configuration the hardware only requires four connections (PWR, TX, RX, GND). Additionally, the analog sensor interface provides direct connections to send temperature, acceleration, and other analog data without requiring additional hardware. The RN-171 is programmed and controlled with simple ASCII command language. Once the RN-171 is set up it can scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. The RN-174 is available in multiple antenna configurations such as Wire, chip, U.Fl connector and a SMA connector.


RN171-I/RM

Product no.: 101000050
18.22 €
Price before VAT, plus delivery
Delivery weight: 4 g

276 pcs. in stock
can be shipped within 3 days


The RN-171 is a small form factor, ultra-low power embedded TCP/IP module measuring only 27 x 18 x 3.1 mm. The RN-171 joins the RN-131 in Microchip's line of full-featured 802.11 b/g surface mount modules. The RN-171 is a standalone, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices. The module is pre-loaded with firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection.


WiFly Configuration Tool

New

Product no.: 101999999
0.00 €
Price before VAT, plus delivery


can be shipped within 1 days

The WiFly Configuration Tool is a unique tool for all Microchip and datasphere WiFi embedded modules, Windows based and easy to use, it provides transparency over the WiFi technology complexity dramatically reducing the time to market and TCO. Its purpose is to allow performance of the preliminary tests, help during design phase, deploy the network on the field and guarantee operation/maintenance on it.

Starting with the basic features like firmware upgrade and configuration of the WiFi modules and moving to the more advanced features, which include the graphic network topology view together with most important parameters this unique tool adds a significant value to datasphere's WiFi modules offer. The WiFly Configuration Tool part allows sending commands and is extremely easy to use, while the configuration wizard helps to speed up the basic configuring and reading of the module setting.


Browse Product Pages
Contact information